ATS application abandonment: why candidates quit and how to fix it
Learn what causes ATS application abandonment and how to find the step where candidates quit, plus an audit table and fixes to make this week.
8 min read
Key takeaways
- Check your application for the common causes of abandonment first: forced account creation, retyping a resume, long forms, and pages that break on phones.
- Measure abandonment as started applications minus completed ones, divided by started, and track it per job and per source.
- Apply to your own jobs on a phone every quarter and time yourself, since that is how many candidates will see the form.
- Move assessments and long questionnaires out of the application and into a step after the candidate applies.
- Send one short follow-up to people who started but did not finish, with a direct link back to where they left off.
ATS application abandonment happens when a candidate starts applying through your applicant tracking system and quits before hitting submit. The usual causes are forced account creation, retyping information that is already on the resume, long or confusing forms, and pages that break on a phone, and most of them can be fixed by cutting the form down and moving screening to a later step.
What is ATS application abandonment?
It is the share of candidates who open your application and never finish it. Someone clicks Apply on a job board, lands in your ATS, and somewhere between the first field and the submit button, they close the tab.
The math uses two counts most ATS reports already include, starts and completions.
Say 400 people start an application for a warehouse role in a month and 140 finish. That is 260 abandoned, or 65 percent. Your completion rate is the flip side, 35 percent in this example. The recruiting metrics glossary lists completion rate and other funnel formulas in one place.
One caution before you compare numbers. Not every ATS counts a start the same way. Some count a click on the apply button. Others only count a start once the candidate creates an account. Check how yours defines it before you compare jobs or vendors.
Why do candidates abandon ATS applications?
When people quit partway through, the form is often the reason, not the job. It asks for too much before the candidate is invested, or it breaks halfway through. Check your application for each of these:
- Forced account creation before the candidate can see a single question.
- Parsing a resume, then asking the candidate to type the same work history into fields anyway.
- Forms that run several pages with no sign of how many are left.
- Pages that do not work well on a phone, such as tiny fields or uploads that only accept files from a desktop.
- Redirects that bounce the candidate from the job board through more than one site, with a new login each time.
- Timed assessments or personality tests dropped into the middle of the form.
- Sessions that time out and erase everything the candidate typed.
- Questions that feel invasive this early, such as full references or salary history. Rules on what you can ask vary by location, so check with your legal team.
- No pay range or schedule in the posting, so the candidate realizes halfway through that the job may not fit.
- Error messages that do not say which field is wrong.
Hourly and high volume roles deserve extra attention here. Those candidates often apply from a phone, sometimes on a break, and they usually have other applications open.
How to find where candidates drop off
Your overall rate tells you there is a problem. The step where people leave tells you what to fix.
Apply to your own job on a phone
Pick your highest volume opening. Start from the job board, not your career site, because that is how most candidates arrive. Use your phone on cellular data, not office Wi-Fi. Time yourself and write down every moment you felt confused or tempted to stop. Then do it again on a laptop, and have someone outside recruiting try it too.
Pull step-level data from your ATS
Some systems report how many candidates reached each page of the application. If yours does, look for the page with the biggest drop. If it does not, ask your vendor whether they can export page views or session data, or whether your career site analytics can track each step.
Split by source and device
A job board that sends people through an extra redirect may show much worse abandonment than your own career page. Phone traffic may abandon at a higher rate than desktop traffic. Split the numbers both ways before you decide what to change.
Ask candidates what nearly stopped them
Add one optional question at the end of the application or in your confirmation email asking what almost stopped them from finishing. People who made it through still remember what nearly made them quit, and their answers tend to cluster around the same two or three problems.
Abandonment audit table: cause, symptom, fix
Keep this table open while you walk through your own application.
| Cause | What you will notice | Fix |
|---|---|---|
| Forced account creation | Big drop on the first page | Let candidates apply as a guest, create the account later |
| Duplicate data entry | Drop right after resume upload | Turn off manual work history fields or make them optional |
| Long form | Steady losses on every page | Cut to name, contact, resume, and a few knockout questions |
| Poor mobile layout | Phone users abandon far more than desktop users | Test on several phones, fix fields and upload options |
| Redirect chains | High abandonment from one job board | Use the board's quick apply or a direct link to your form |
| Assessment in the form | Drop at the test page | Move the assessment to after the application |
| Session timeouts | Complaints about lost work | Autosave progress or extend the timeout |
| No pay or schedule info | Candidates quit mid-form or withdraw early | Put pay range and shift details in the posting |
| Unclear errors | Drop on the submit page | Show the problem next to the field, in plain words |
Fixes you can make this week
Most of these need a settings change or a quick request to your ATS admin, not a new system.
- Turn on guest apply, or move account creation to after submission.
- Make every field that a first screen does not need optional, then remove the ones nobody fills in.
- Cut knockout questions to the ones that actually disqualify, such as work authorization or a required license.
- Add a line at the top that says how long the application takes, such as "about 5 minutes," and make sure it is true.
- Show a progress bar or page count so candidates can see how much is left.
- Add pay range and schedule to every posting so people self-select before they start.
- Rewrite error messages so they name the field and the fix.
- Send an immediate confirmation so candidates know the application went through. The thank you email templates for candidates give you wording to start from.
Fixes that take longer
These usually need time from your ATS vendor, an integration partner, or IT, so plan them into the next quarter.
- Rebuilding the mobile experience, or switching to a mobile-first apply flow. The mobile friendly job application checklist walks through what to test.
- Cleaning up job board integrations so candidates land directly on your form.
- Setting up autosave so a dropped connection does not wipe the candidate's progress.
- Building short applications for hourly roles and longer ones for roles where candidates expect more steps.
What to move out of the application
Often the most useful change is to stop using the application as a screening tool. The application only needs to tell you whether this person is worth a closer look. Skills tests, detailed availability grids, long-answer questions about experience, reference details, and questions about how the person handles customers or conflict can all wait until the candidate has already applied.
A short application with a quick next step keeps more people moving. A one-way video interview works well as that step. The candidate gets a link right after applying and answers a few questions on their own time. With DeepHire, for example, recruiters pick three to five questions and candidates record answers in the browser on a phone or laptop, with nothing to download. Two automatic reminders go out about two and three days after the invite. For more on measuring and improving this part of the funnel, see how to raise your application completion rate.
How to bring back candidates who started but did not finish
If your ATS captures an email or phone number on the first page, you can follow up with people who abandoned. Send a short message within a day. If your system supports it, include a link that takes them back to where they stopped.
A simple template:
Send one follow-up, two at most. More than that starts to feel like pressure. Make sure your messages follow your company's rules on texting and email consent, and check with your legal team if you are unsure.
What to watch after you make changes
Change one or two things at a time so you can tell what worked. Track abandonment rate by job and by source for a few weeks before and after each change.
Watch applicant quality too. If completion goes up but most new applicants fail the first screen, a knockout question you removed may have been doing real work. Put it back in the form or in the next step.
Repeat the phone test every quarter. ATS updates and questions that hiring managers add over time can slowly make a short form long again.
Frequently asked questions
What is a good job application completion rate?
There is no single benchmark that fits every role, because hourly candidates and executive candidates behave differently. Compare your rate against your own past numbers and across your own jobs and sources. A job that completes far worse than similar jobs usually has a fixable problem in its form or its source.
How long should a job application take to complete?
For hourly and high volume roles, aim for something a candidate can finish on a phone in about five minutes. Professional roles can run a little longer, but every added question should earn its place. Time it yourself on a phone to check.
Does requiring an account increase application abandonment?
Yes, in many cases. Asking for a password before the candidate has seen a single question gives them an early reason to leave, and guest apply or creating the account after submission removes that barrier. Check whether your ATS offers the setting, and look at your first-page drop to see how much it costs you.
Can I contact candidates who did not finish their application?
You can if your ATS captured their contact details and your consent practices allow it. Send one short message within a day with a direct link back to the form. Rules on texting and email consent vary by location, so check with your legal team.