Video interview before and after metrics: what to measure and how to prove it worked
Video interview before and after metrics to track, how to set a clean baseline, an ROI formula, and a report template you can copy for your team.
8 min read
Key takeaways
- Pull four to six weeks of baseline data on the same roles before you switch, or you will have nothing honest to compare against.
- Track time to first screen, recruiter screening hours per hire, screen completion rate, time to shortlist, and hiring manager feedback time as your core five.
- Add one quality check, such as interview to offer ratio or early retention, so speed gains do not hide worse hires.
- Calculate ROI as recruiter hours saved times loaded hourly cost, minus the monthly software cost.
- Change one thing at a time during the comparison window so the numbers point to the video interview and not to something else.
The video interview before and after metrics worth tracking are time to first screen, recruiter screening hours per hire, screen completion rate, time to shortlist, hiring manager feedback time, and one quality measure such as interview to offer ratio. Pull four to six weeks of baseline data on the same roles before you switch, then compare the same numbers over the first six to eight weeks after launch.
Which metrics should you track before and after adopting video interviews?
Pick metrics the change can actually move. A one-way video interview replaces the phone screen and the scheduling that comes with it, so the biggest effects show up early in the funnel. Later metrics like time to fill will move too, but more slowly and with more noise.
| Metric | How to calculate it | Where the data lives | Direction you want |
|---|---|---|---|
| Time to first screen | Days from application to a completed screen | ATS timestamps, interview tool | Shorter |
| Recruiter screening hours per hire | Total screening and scheduling hours divided by hires | Calendar, time log | Lower |
| Screen completion rate | Completed screens divided by screens invited | Interview tool or calendar | Same or higher |
| Scheduling touches per candidate | Messages and calls needed to book one screen | Inbox, ATS activity log | Near zero |
| Time to shortlist | Days from job open (or job order) to first shortlist sent | ATS, email | Shorter |
| Hiring manager feedback time | Days from shortlist sent to a yes or no on each candidate | Email, ATS notes | Shorter |
| Screen to interview rate | Candidates advanced after screen divided by candidates screened | ATS stages | Similar to baseline, with less swing week to week |
| Interview to offer ratio | Live interviews held divided by offers made | ATS, hiring manager calendars | Lower |
| Apply to screen drop-off | Applicants who never complete a screen divided by applicants invited | ATS, interview tool | Lower |
| Time to fill | Days from job open to accepted offer | ATS | Shorter |
| Early retention | Hires still employed at 90 days divided by hires | HRIS, payroll | Same or better |
If any of these formulas are new to you, the recruiting metrics glossary has plain definitions and worked examples you can match your reporting to.
You do not need all eleven. A small team can run the comparison on the first five plus one quality metric. Agencies should add time to submittal and client feedback time, since those are the numbers clients notice.
How do you capture a clean baseline before switching?
Skip this step and you end up rebuilding the old numbers from memory after the new tool is live. Capture the baseline first.
1. Pick the roles you will compare
Choose two or three roles you hire for often, such as warehouse associates or customer service reps. Keep the same roles in the after period. Comparing a seasonal retail push to a slow month of accounting hires tells you nothing.
2. Write down your definitions
Decide what counts as "screened," "shortlisted," and "day zero." For example, settle whether day zero is the application date or the date a recruiter first opened the application. Put the definitions in a shared doc so the after period uses the same rules.
3. Pull the timestamps
Export application dates, stage changes, and hire dates from your ATS for the last four to six weeks. If your ATS does not record when a phone screen happened, use calendar data.
4. Log recruiter time for two weeks
Ask each recruiter to track screening time in 15-minute blocks, covering booking calls, rescheduling, no-shows, the calls themselves, and writing notes. It is tedious, but your ROI depends on this number. Estimates from memory tend to come in low because people forget the rescheduling and no-show time.
5. Note anything unusual
Holiday weeks, a big client launch, a recruiter on leave, or a change in job board spend can all skew the numbers. Write them down now so you can explain odd results later.
How long until video interviews show results?
The first two weeks are noisy. Recruiters are still learning the review screen, and some candidates are still moving through the old process. Question sets often get edited during this stretch too. Do not report on this window.
Between weeks three and six, time to first screen and scheduling touches should drop, because candidates record when it suits them instead of waiting for an open slot on your calendar. This is usually the first change you can see in the data.
Between weeks six and ten, time to shortlist and hiring manager feedback time start to move, especially if managers can watch answers from a shared link instead of waiting for a call recap. Interview to offer ratio shows up last, because you need enough offers to see a pattern.
Early retention takes at least 90 days after the first hires from the new process. Put a calendar reminder in now.
How do you calculate the ROI of video interviews?
Keep the formula simple enough that finance will accept it.
Strictly, that gives you net monthly savings. If finance wants a ratio, divide the net savings by the software cost. "Loaded hourly cost" means the recruiter's total employment cost, including benefits, divided by working hours. Your finance or HR team can give you the figure they use.
Working through the math for one recruiter
These are example numbers to show the arithmetic. Replace them with your own baseline.
Say one recruiter screens 60 candidates a month. In the baseline log, each phone screen took about 30 minutes once you add booking, a reschedule or two, no-shows, and notes. That is 30 hours a month.
After the switch, the recruiter reviews short recorded answers at faster playback and stops watching after the first question when a candidate does not fit. Say that averages 10 minutes per candidate, or 10 hours a month. That saves 20 hours.
At a loaded cost of $40 an hour, 20 hours is $800 a month. Subtract your monthly software cost from that figure to get the net savings for that one recruiter, before counting any benefit from faster fills.
If you want to include faster fills, estimate what an open seat costs per day, such as overtime or lost sales, and multiply it by the days you cut from time to fill. Keep this as a separate line so the time savings number stands on its own.
For more on where the hours come from, see this breakdown of the benefits of asynchronous video interviewing for recruiters.
What mistakes make before and after numbers misleading?
- Changing two things at once. If you launch video interviews the same month you switch job boards, you cannot say which one helped.
- Counting only candidates who finished. If completion drops, your screened-candidate metrics can look great while you lose people. Always report completion rate next to the speed metrics.
- Leaving out review time. Candidates record on their own time, but the recruiter still has to watch. Count review minutes in the after period the same way you counted call minutes before.
- Tiny samples. Ten hires in each period is not enough to say much about quality. Report quality metrics as early signals until you have more volume.
- Mixing role types. A role with 300 applicants behaves differently from one with 12. Compare like with like, and check the applicant to hire ratio for each role to spot mismatches.
- Ignoring candidate experience. Track drop-off between invite and completion, and read the comments candidates leave. If the funnel got faster but strong candidates are dropping out, you have a problem to fix before you report a win.
A one-page report template you can copy
Send this to leadership or a client at the 60-day mark. Fill in the blanks from your baseline and after period.
| Metric | Before (baseline weeks) | After (weeks 3 to 8) | Change | Notes |
|---|---|---|---|---|
| Time to first screen (days) | ||||
| Recruiter screening hours per hire | ||||
| Screen completion rate | ||||
| Scheduling touches per candidate | ||||
| Time to shortlist (days) | ||||
| Hiring manager feedback time (days) | ||||
| Interview to offer ratio | ||||
| Monthly ROI (from formula) | n/a |
Under the table, write three short lines: what improved, what did not, and what you will change next. Be honest about flat numbers. A report that explains them is more believable than one where every row went up.
What if the numbers do not move?
If completion rate is low, look at the invite first. Long question sets and short deadlines are the usual causes. Open the link on your own phone too, since a link that is hard to use on mobile loses people fast. Cut to three to five questions and give candidates three to five days to respond. A planned video interview reminder schedule often closes most of the gap. DeepHire, for example, sends two automatic reminders at about two and three days after the invite and reports about a 97% completion rate.
If recruiter hours did not drop, check how people are reviewing. Watching every answer in full at normal speed can take as long as a phone call. Agree on a rule, such as stopping after the first question when a candidate misses a must-have requirement.
If time to shortlist improved but time to fill did not, the bottleneck has moved to the hiring manager. Share recorded answers by link and ask for feedback within two business days. Then track feedback time as its own metric in the next report.
Frequently asked questions
How long should I measure before and after switching to video interviews?
Use four to six weeks of baseline data and at least six to eight weeks after launch, skipping the first two weeks while the team settles in. Quality metrics like early retention need at least 90 days after the first hires from the new process.
Do one-way video interviews reduce time to hire?
They usually shorten time to first screen because candidates record on their own schedule instead of waiting for a call slot. Whether overall time to hire drops depends on what happens after the screen, especially how fast hiring managers give feedback.
How do I calculate recruiter time saved with video interviews?
Log screening time for two weeks before the switch, including booking, rescheduling, no-shows, calls, and notes. Then log review time the same way after the switch and subtract. Multiply the hours saved by your loaded hourly cost to get a dollar figure.
What is a good completion rate for video interviews?
Compare it to your old phone screen show rate for the same roles rather than chasing an industry number. If completion is lower than your old show rate, try a shorter question set and a longer deadline with reminders before deciding the format does not work.